Spin Bridge

Overview

The Spin Bridge is the central control unit for the SD/SDV-Series screwdriving system.

It provides:

• Power supply to the tool

• Communication interface to robot or PLC

• Safety signal handling

• I/O interface for system integration

Electrical

Parameter	Value
Supply voltage	120 – 230 V AC
Frequency	50 / 60 Hz
Internal power supply	48 V DC
Max tool current	10 A
External I/O supply	24 V DC (from robot / PLC)

Note

The Spin Bridge provides all electrical power required by the tool.

Note

The 24V supply for I/O and safety signals must be provided externally by the robot or PLC.

This supply is not generated by the Spin Bridge.

Tool Interface

Parameter	Value
Communication	RS485 (point-to-point)
Connector type	8-pin M12 (signal)
Power connector	4-pin M12 (48V motor supply)

Safety Interface

Parameter	Value
Safety signals	OSSD (dual channel)
Channels	OSSD A / OSSD B
Supply	24 V (from robot / PLC)

Important

The Spin Bridge provides safety-related signals but does not perform the safe stop function.

The safe stop must be implemented by the robot or PLC.

I/O Interface

Parameter	Value
Digital inputs	8
Digital outputs	8
Signal type	24 V DC
Standard	IEC 61131-2

Note

The I/O module is galvanically isolated and powered externally by the robot or PLC.

Communication Interfaces

Parameter	Value
Ethernet ports	2 × RJ45
Port 1	External network
Port 2	Robot connection
Protocols	OPC-UA

Environmental

Parameter	Value
Operating temperature	0 – 50 °C
Installation	Control cabinet / industrial

General

Parameter	Value
Mounting	DIN rail / panel
Cooling	Passive / forced convection

Note

Specifications are subject to change without notice.