Compliance
SD/SDV-Series Declaration of incorporation
You can download the SD/SDV-Series CE Declaration of Incorporation here:
Applied Standards
The SD/SDV-Series and SpinBridge are designed and evaluated in accordance with the following standards.
When an EU Directive is referenced, the standard is harmonized under that directive and provides presumption of conformity.
General Machinery Safety
ISO 12100:2010
EN ISO 12100:2010 [2006/42/EC]
Safety of machinery – General principles for design – Risk assessment and risk reduction
ISO 20607:2019
EN ISO 20607:2019 [2006/42/EC]
Safety of machinery – Instruction handbook – General drafting principles
Robot and Collaborative Operation
ISO 10218-1:2011
ISO 10218-2:2011
EN ISO 10218-1/2:2011 [2006/42/EC]
Robots and robotic devices – Safety requirements for industrial robots
ISO/TS 15066:2016
Collaborative robot operation (technical specification)
ISO/TR 20218-1:2018
End-of-arm tooling safety guidance
ANSI/RIA R15.06-2012
CAN/CSA-Z434-14
North American robot safety standards
Functional Safety
ISO 13849-1:2015
EN ISO 13849-1:2015 [2006/42/EC]
Safety-related parts of control systems (Performance Level)
IEC 62061:2005
EN 62061:2005 [2006/42/EC]
Functional safety of control systems
Mechanical Interface
ISO 9409-1:2019
Robot mechanical interface (flange – type 50-4-M6)
Electrical and Interfaces
IEC 61131-2:2017
EN 61131-2:2017
Programmable controllers – Equipment requirements
IEC 61076-2-101:2014
EN 61076-2-101:2014
M12 circular connectors (8-pin, A-coded)
IEC 60664-1:2017
EN 60664-1:2007 [2014/35/EU]
Insulation coordination
IEC 60664-5:2007
Clearance and creepage distances
Environmental and Mechanical Testing
IEC 60068-2-1
Cold
IEC 60068-2-2
Dry heat
IEC 60068-2-27
Shock
IEC 60068-2-64
Vibration
Ingress Protection
IEC 60529:2013
EN 60529/A2:2013
IP classification
Electromagnetic Compatibility (EMC)
IEC 61000-6-2:2016
Immunity – industrial environments
IEC 61000-6-4:2019
Emission – industrial environments
IEC 61000-4-2
Electrostatic discharge immunity
EN 50370-1 / EN 50370-2
EMC for machine tools
Product Specific Standards
ISO 5393:2017
Performance testing of screwdrivers
ISO 13732-1:2006
EN ISO 13732-1:2008 [2006/42/EC]
Surface temperature limits
North American Compliance
UL 1740:2018
Robots and robotic equipment
Notes
Note
The listed standards represent the primary standards applied during design and validation of the product.
Additional standards may apply depending on the specific robot system, integration, and end-use application.
Important
The SD/SDV-Series is delivered as partly completed machinery.
Compliance with the Machinery Directive and other applicable regulations must be ensured by the system integrator.