Factory Reset of the SpinBridge

The SpinBridge can be reset using the Factory Reset button located on the front panel.

Reset Types

• Short press (< 5 seconds): Resets network settings only

• Long press (≥ 5 seconds): Performs a full factory reset

Procedure

1. Locate the Factory Reset button on the front of the SpinBridge

2. Press and hold the button

3. Release the button according to the desired reset type

Note

The reset button must be held continuously. Releasing the button early will cancel the reset.

Important Information

Warning

A long press performs a complete factory reset.

This will:

• Delete all screw programs

• Delete all stored screw traces

• Reset all user settings to default

This action cannot be undone.