Supported screws
Screw lengths up to 35mm are supported for collaborative solutions with the default configuration, longer screws are supported non collaboratively.
Note
Make sure to verify that your screw fits your screw feeder/feeding system.
If your screw is not in the table, contact support and we will Test compatibility.
These tables list the standards that describe the screws that we support. A screw standard typically describes the shape of the whole screw but not the size and length, for our purpose we mainly care about the head of the screw and there can therefore be some overlap between standards.
Head types
Pan head |
Countersunk head |
Socket head |
|
|
|
SD & SDV series compatibility
ISO / DIN / ASME |
type |
Size |
|---|---|---|
ISO 14583 / DIN 7985 |
pan head - tx |
M2 - M6 |
ISO 14581 |
countersunk - tx |
M2 - M6 |
DIN 912 |
socket head - hex |
M2 - M6 |
ISO 4762 |
socket head - hex |
M2 - M6 |
ISO 14579 |
socket head - tx |
M2 - M6 |
ISO 14580 |
socket head - tx |
M2 - M6 |
DIN 7981 C&F / ISO 7049 |
pan head C:ph F:pz |
2mm - 6mm |
DIN 7983 C&F |
countersunk pan C:ph F:pz |
2mm - 6mm |
WN 5251 |
thread forming panhead - tx |
2mm - 6mm |
DIN 7500 M |
thread forming countersunk - pz |
2mm - 6mm |
DIN 14586 C |
self tapping countersunk - tx |
2mm - 6mm |
DIN 7982 C&F |
self tapping countersunk - C:ph F:pz |
2mm - 6mm |
WN 1411 |
thread forming panhead - ph |
2mm - 6mm |
WN 5451 |
thread forming panhead - tx |
2mm - 6mm |