You are reading version 1.3 of this manual. The current release is 1.6 — view this page in 1.6.

Supported screws

screwlengths up to 35mm are supported for collaborative solutions with the default configuration, longer screws are supported non collaborativly.

If your screw is not in the tabel, contact support and we will test compatiblity.

Magnetic

ISO / DIN / ASME	type	Size
ISO 14583 / DIN 7985	pan head - tx	M2 - M8
ISO 14581	countersunk - tx	M2 - M8
DIN 912	socket head - hex	M2 - M8
ISO 4762	socket head - hex	M2 - M8
ISO 14579	socket head - tx	M2 - M8
ISO 14580	socket head - tx	M2 - M8
DIN 7981 C&F / ISO 7049	pan head C:ph F:pz	2mm - 8mm
DIN 7983 C&F	countersunk pan C:ph F:pz	2mm - 8mm
WN 5251	thread forming panhead - tx	2mm - 8mm
DIN 7500 M	thread forming countersunk - pz	2mm - 8mm
DIN 14586 C	self tapping countersunk - tx	2mm - 8mm
DIN 7982 C&F	self tapping countersunk - C:ph F:pz	2mm - 8mm
WN 1411	thread forming panhead - ph	2mm - 8mm
WN 5451	thread forming panhead - tx	2mm - 8mm

Vacuum

ISO / DIN / ASME	type	Size
ISO 14583 / DIN 7985	pan head - tx	M2 - M8
ISO 14581	countersunk - tx	M2 - M8
DIN 912	socket head - hex	M2 - M8
ISO 4762	socket head - hex	M2 - M8
ISO 14579	socket head - tx	M2 - M8
ISO 14580	socket head - tx	M2 - M8
DIN 7981 C&F / ISO 7049	pan head C:ph F:pz	2mm - 8mm
DIN 7983 C&F	countersunk pan C:ph F:pz	2mm - 8mm
WN 5251	thread forming panhead - tx	2mm - 8mm
DIN 7500 M	thread forming countersunk - pz	2mm - 8mm
DIN 14586 C	self tapping countersunk - tx	2mm - 8mm
DIN 7982 C&F	self tapping countersunk - C:ph F:pz	2mm - 8mm
WN 1411	thread forming panhead - ph	2mm - 8mm
WN 5451	thread forming panhead - tx	2mm - 8mm