General Safety Instructions
Warning
Generally, all national regulations, legislations, and laws within the country of installation must be observed. Integration and use of the product must be done with the precautions explained throughout this manual.
Particular attention must be paid to the following warnings:
Warning
You must not power-on SD35/70 if it is/has been exposed to condensing conditions. If condensing conditions appear during transport or storage, the product must be placed between 20 and 40 Celsius degrees for 24 hours before power is applied or before connected to a robot.
It is recommended that the use of SD35/70 follows these standards:
ISO 10218-2
ISO 12100
ISO/TR 20218-1
ISO/TS 15066
Warning
Always ensure to power off the SD35/70 tool and SpinBridge while working/installing the physical installation.